{
  "schema_version": "2.0",
  "run_id": "assembly-seed203",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": true,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": true,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": true,
    "observed_motion": true,
    "arms_released": true
  },
  "blockers": [],
  "metrics": {
    "samples": 2172,
    "duration_s": 108.54999999999598,
    "final_gap_mm": -0.00010686926543712616,
    "final_yaw_error_deg": 0.36918869614601135,
    "final_lateral_error_mm": 2.777266502380371,
    "final_relative_position_mm": [
      0.012596299711731263,
      2.777238143607974,
      -1.0001069167628884
    ],
    "final_pin_position_mm": [
      -0.5745791713707149,
      0.11596293188631535,
      4.001557361334562
    ],
    "peak_sampled_axial_n": 31.951734956384737,
    "peak_sampled_lateral_n": 8.49347725946429,
    "peak_sampled_torque_nm": 0.24945034004785052,
    "longest_pull_duration_s": 2.0499999999998835,
    "observed_motion_deg": 30.07178497314453
  },
  "telemetry_sha256": "ea42e9322d7095f9e2fd432f2863617c5a2b8ae14c61bec5bbb1aaab05f721cc",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.050000000000036,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.050000000000235,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.050000000000292,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 32.05000000000032,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 39.099999999999916,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 41.1499999999998,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 53.3999999999991,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 58.649999999998805,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 76.04999999999782,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 78.0999999999977,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 84.84999999999732,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 99.89999999999647,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 102.7499999999963,
      "phase": "motion_open",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 104.79999999999619,
      "phase": "motion_close",
      "reason": "Measured gripper joint travel is reaching 30 degrees"
    }
  ]
}