{
  "schema_version": "2.0",
  "run_id": "assembly-seed205",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": true,
    "pin_engagement": false,
    "sampled_force_limits": false,
    "sampled_torque_limit": true,
    "sustained_pull": false,
    "observed_motion": false,
    "arms_released": false
  },
  "blockers": [
    "complete_assembly_sequence",
    "pin_engagement",
    "sampled_force_limits",
    "sustained_pull",
    "observed_motion",
    "arms_released"
  ],
  "metrics": {
    "samples": 2679,
    "duration_s": 133.8999999999962,
    "final_gap_mm": -0.0002782326191663742,
    "final_yaw_error_deg": 0.7318503260612488,
    "final_lateral_error_mm": 6.877435684204102,
    "final_relative_position_mm": [
      0.2710296248551458,
      -6.872093304991722,
      -1.0002782801166177
    ],
    "final_pin_position_mm": [
      0.2240640897070989,
      -79.29863035678864,
      4.235583823174238
    ],
    "peak_sampled_axial_n": 47.43623768782641,
    "peak_sampled_lateral_n": 26.93181591259364,
    "peak_sampled_torque_nm": 1.2506416019006819,
    "longest_pull_duration_s": 0.0,
    "observed_motion_deg": 0
  },
  "telemetry_sha256": "32c9b7399a6b0736725b791a0ba9410810a7f7d23652e17c7645ee2d1abe8d4d",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.200000000000038,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.200000000000237,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.200000000000294,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 35.250000000000135,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 42.54999999999972,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 44.5999999999996,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 56.84999999999891,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 62.79999999999857,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 81.44999999999752,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 83.4999999999974,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 90.24999999999702,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 94.84999999999675,
      "phase": "retract",
      "reason": "Measured contact force exceeds 45 N"
    },
    {
      "time_s": 98.89999999999652,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 104.44999999999621,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 104.4999999999962,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 106.54999999999609,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 118.79999999999539,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 131.34999999999562,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    }
  ]
}