{
  "schema_version": "2.0",
  "run_id": "assembly-seed340",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": true,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": true,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": true,
    "observed_motion": true,
    "arms_released": true
  },
  "blockers": [],
  "metrics": {
    "samples": 2078,
    "duration_s": 103.84999999999624,
    "final_gap_mm": -0.00016915146261453629,
    "final_yaw_error_deg": 0.23217983543872833,
    "final_lateral_error_mm": 6.975745677947998,
    "final_relative_position_mm": [
      -0.4748784995172173,
      6.959563121199608,
      -1.0001691989600658
    ],
    "final_pin_position_mm": [
      -0.3123906208202243,
      0.8912119665183127,
      4.003583919256926
    ],
    "peak_sampled_axial_n": 32.56365288930044,
    "peak_sampled_lateral_n": 8.963520728745372,
    "peak_sampled_torque_nm": 0.5463645783722525,
    "longest_pull_duration_s": 2.0499999999998835,
    "observed_motion_deg": 30.07177734375
  },
  "telemetry_sha256": "2197f8433c9ce0464d4b41731c0984b1f2cfbdd79576eb81b0fea03bdeaffb1b",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.450000000000042,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.45000000000024,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.450000000000298,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 32.50000000000029,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 39.74999999999988,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 41.79999999999976,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 54.049999999999066,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 57.049999999998896,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 73.19999999999798,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 75.24999999999787,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 81.99999999999748,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 95.19999999999673,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 98.04999999999657,
      "phase": "motion_open",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 100.09999999999646,
      "phase": "motion_close",
      "reason": "Measured gripper joint travel is reaching 30 degrees"
    }
  ]
}