{
  "schema_version": "2.0",
  "run_id": "assembly-seed345",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": false,
    "pin_engagement": false,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": false,
    "observed_motion": false,
    "arms_released": false
  },
  "blockers": [
    "complete_assembly_sequence",
    "seating",
    "pin_engagement",
    "sustained_pull",
    "observed_motion",
    "arms_released"
  ],
  "metrics": {
    "samples": 1004,
    "duration_s": 50.14999999999929,
    "final_gap_mm": 50.30556106567383,
    "final_yaw_error_deg": 0.09574825316667557,
    "final_lateral_error_mm": 8.770005226135254,
    "final_relative_position_mm": [
      6.011563818901777,
      6.38545909896493,
      49.30556192994118
    ],
    "final_pin_position_mm": [
      -139.34247195720673,
      -94.016894698143,
      -15.60000330209732
    ],
    "peak_sampled_axial_n": 4.743808269583399,
    "peak_sampled_lateral_n": 2.6455281939763675,
    "peak_sampled_torque_nm": 0.08216905297602838,
    "longest_pull_duration_s": 0.0,
    "observed_motion_deg": 0
  },
  "telemetry_sha256": "8e621122921f257518eedc82ab2176f4bef763c67293bbb1537dd0b02f9f7e74",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.150000000000038,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.150000000000237,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.150000000000293,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 50.199999999999285,
      "phase": "safe_stop",
      "reason": "Alignment timeout"
    }
  ]
}