{
  "schema_version": "2.0",
  "run_id": "assembly-seed346",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": true,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": true,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": true,
    "observed_motion": true,
    "arms_released": true
  },
  "blockers": [],
  "metrics": {
    "samples": 2252,
    "duration_s": 112.54999999999575,
    "final_gap_mm": -0.00022782478481531143,
    "final_yaw_error_deg": 0.08625375479459763,
    "final_lateral_error_mm": 7.018893718719482,
    "final_relative_position_mm": [
      0.690088898409158,
      6.984886713325977,
      -1.0002278722822666
    ],
    "final_pin_position_mm": [
      -0.2786539262160659,
      0.09999904432334006,
      4.001259803771973
    ],
    "peak_sampled_axial_n": 36.93638300402054,
    "peak_sampled_lateral_n": 8.689457012964189,
    "peak_sampled_torque_nm": 0.3033661427931385,
    "longest_pull_duration_s": 2.0499999999998835,
    "observed_motion_deg": 30.07177734375
  },
  "telemetry_sha256": "3e52905053a7d27971637151a5148185e3fcca9b29635931bccf662447bb409b",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.30000000000004,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.30000000000024,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.300000000000296,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 32.65000000000028,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 39.94999999999987,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 41.99999999999975,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 54.249999999999055,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 58.299999999998825,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 77.14999999999776,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 79.19999999999764,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 85.94999999999726,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 103.89999999999624,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 106.74999999999608,
      "phase": "motion_open",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 108.79999999999596,
      "phase": "motion_close",
      "reason": "Measured gripper joint travel is reaching 30 degrees"
    }
  ]
}