{
  "schema_version": "2.0",
  "run_id": "assembly-seed401",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": true,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": true,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": true,
    "observed_motion": true,
    "arms_released": true
  },
  "blockers": [],
  "metrics": {
    "samples": 2206,
    "duration_s": 110.24999999999588,
    "final_gap_mm": -0.00016915146261453629,
    "final_yaw_error_deg": 0.12958811223506927,
    "final_lateral_error_mm": 7.027397632598877,
    "final_relative_position_mm": [
      0.8367774426005781,
      6.977400742471218,
      -1.0001691989600658
    ],
    "final_pin_position_mm": [
      0.7544722175225616,
      0.15378164243884385,
      4.001498222351074
    ],
    "peak_sampled_axial_n": 40.33523603499034,
    "peak_sampled_lateral_n": 8.257257312940213,
    "peak_sampled_torque_nm": 0.3047987971954656,
    "longest_pull_duration_s": 2.0499999999998835,
    "observed_motion_deg": 30.071788787841797
  },
  "telemetry_sha256": "b9a7777d3d1cfcf5d77fcb2a98448c42710cd1f952574ca7eb8634ce7c86e511",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.000000000000036,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.000000000000234,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.00000000000029,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 32.65000000000028,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 39.14999999999991,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 41.1999999999998,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 53.4499999999991,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 56.9499999999989,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 73.59999999999796,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 75.64999999999785,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 82.39999999999746,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 101.59999999999637,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 104.44999999999621,
      "phase": "motion_open",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 106.49999999999609,
      "phase": "motion_close",
      "reason": "Measured gripper joint travel is reaching 30 degrees"
    }
  ]
}