{
  "ready": false,
  "simulation_evidence_ready": true,
  "simulation_campaign_ready": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding",
    "at_least_20_full_trials",
    "full_trial_success_rate_at_least_95_percent",
    "campaign_has_no_grasp_limit_violations",
    "calibrated_hardware_wrench",
    "physics_substep_peak_coverage",
    "physical_hardware_validation"
  ],
  "extended_requirements": {
    "grasp_motion_proxy_available": true,
    "grasp_motion_proxy_within_2mm": true,
    "at_least_20_full_trials": false,
    "full_trial_success_rate_at_least_95_percent": false,
    "campaign_evidence_complete": true,
    "campaign_has_no_grasp_limit_violations": false,
    "campaign_has_no_sampled_safety_violations": true,
    "calibrated_hardware_wrench": false,
    "physics_substep_peak_coverage": false,
    "physical_hardware_validation": false
  },
  "grasp_motion_proxy_mm": 1.6955978464992918,
  "matching_controller_trial_count": 4,
  "matching_controller_passes": 3,
  "assembly": {
    "schema_version": "2.0",
    "run_id": "cli-alignment345-v20",
    "backend": "Isaac Lab PhysX on bimanual YAM",
    "simulation_task_passed": true,
    "production_ready": false,
    "production_blockers": [
      "Physical hardware validation is not performed",
      "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
      "Independent wrist sensor calibration and safety validation are outstanding"
    ],
    "checks": {
      "telemetry_finite": true,
      "telemetry_contiguous": true,
      "contact_force_available": true,
      "contact_torque_available": true,
      "no_sensor_errors": true,
      "complete_assembly_sequence": true,
      "seating": true,
      "pin_engagement": true,
      "sampled_force_limits": true,
      "sampled_torque_limit": true,
      "sustained_pull": true,
      "observed_motion": true,
      "arms_released": true
    },
    "blockers": [],
    "metrics": {
      "samples": 2080,
      "duration_s": 103.94999999999624,
      "final_gap_mm": -0.00010652001947164536,
      "final_yaw_error_deg": 0.2937268912792206,
      "final_lateral_error_mm": 2.1589901447296143,
      "final_relative_position_mm": [
        -0.007058309620333603,
        2.1589784882962704,
        -1.000106567516923
      ],
      "final_pin_position_mm": [
        -0.7254787487909198,
        1.1342946672812104,
        4.004418849945068
      ],
      "peak_sampled_axial_n": 29.921384100198523,
      "peak_sampled_lateral_n": 8.055021065839146,
      "peak_sampled_torque_nm": 0.3605477313968732,
      "longest_pull_duration_s": 2.0499999999998835,
      "observed_motion_deg": 30.071866989135742
    },
    "telemetry_sha256": "c58f904865f59b10ed402565af48a4d09e4d76fa432474943f61cff7a61f1aa1",
    "events": [
      {
        "time_s": 10.000000000000007,
        "phase": "align",
        "reason": "Transport completed. Using measured relative pose."
      },
      {
        "time_s": 12.150000000000038,
        "phase": "insert",
        "reason": "Measured alignment is within 1 mm and 1 degree"
      },
      {
        "time_s": 26.150000000000237,
        "phase": "retract",
        "reason": "Insertion timeout with unresolved gap"
      },
      {
        "time_s": 30.150000000000293,
        "phase": "align",
        "reason": "Bounded recovery budget check"
      },
      {
        "time_s": 32.3000000000003,
        "phase": "insert",
        "reason": "Measured alignment is within 1 mm and 1 degree"
      },
      {
        "time_s": 38.79999999999993,
        "phase": "verify_seating",
        "reason": "Measured seating geometry is within tolerance"
      },
      {
        "time_s": 40.84999999999982,
        "phase": "transfer",
        "reason": "Executing bounded collision clearance waypoints"
      },
      {
        "time_s": 53.09999999999912,
        "phase": "pin_align",
        "reason": "Waypoint transfer completed"
      },
      {
        "time_s": 56.84999999999891,
        "phase": "pin_insert",
        "reason": "Physical pin is aligned with cross holes"
      },
      {
        "time_s": 73.74999999999795,
        "phase": "verify_pin",
        "reason": "Measured cross pin position is within tolerance"
      },
      {
        "time_s": 75.79999999999784,
        "phase": "transfer",
        "reason": "Executing bounded collision clearance waypoints"
      },
      {
        "time_s": 82.54999999999745,
        "phase": "pull_test",
        "reason": "Waypoint transfer completed"
      },
      {
        "time_s": 95.29999999999673,
        "phase": "transfer",
        "reason": "Executing bounded collision clearance waypoints"
      },
      {
        "time_s": 98.14999999999657,
        "phase": "motion_open",
        "reason": "Waypoint transfer completed"
      },
      {
        "time_s": 100.19999999999645,
        "phase": "motion_close",
        "reason": "Measured gripper joint travel is reaching 30 degrees"
      }
    ]
  },
  "media_checks": [
    {
      "path": "media/cli-alignment345-v20/~f1~scene-0-e0~left_cam.mp4",
      "verified": true,
      "native_hd": true,
      "telemetry_frame_alignment": true,
      "frames": 2081
    },
    {
      "path": "media/cli-alignment345-v20/~f1~scene-0-e0~right_cam.mp4",
      "verified": true,
      "native_hd": true,
      "telemetry_frame_alignment": true,
      "frames": 2081
    },
    {
      "path": "media/cli-alignment345-v20/~f1~scene-0-e0~top_cam.mp4",
      "verified": true,
      "native_hd": true,
      "telemetry_frame_alignment": true,
      "frames": 2081
    }
  ],
  "source_checks": [
    {
      "file": "cell_policy.py",
      "verified": true
    },
    {
      "file": "fast_ik.py",
      "verified": true
    },
    {
      "file": "install_plugin.py",
      "verified": true
    },
    {
      "file": "cell_v2.py",
      "verified": true
    },
    {
      "file": "sitecustomize.py",
      "verified": true
    },
    {
      "file": "compact_run.py",
      "verified": true
    },
    {
      "file": "safety_gate.py",
      "verified": true
    },
    {
      "file": "export_png.py",
      "verified": true
    }
  ]
}