{
  "schema_version": "2.0",
  "run_id": "cli-grasp205-v21",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": true,
    "seating": false,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": true,
    "observed_motion": true,
    "arms_released": true
  },
  "blockers": [
    "seating"
  ],
  "metrics": {
    "samples": 2143,
    "duration_s": 107.09999999999606,
    "final_gap_mm": -0.00016577541828155518,
    "final_yaw_error_deg": 7.326277256011963,
    "final_lateral_error_mm": 0.1619386523962021,
    "final_relative_position_mm": [
      -0.06183863297337666,
      -0.1496666664024815,
      -1.0001658229157329
    ],
    "final_pin_position_mm": [
      -0.020248655346222222,
      0.2047867892542854,
      4.001796245574951
    ],
    "peak_sampled_axial_n": 30.54924092813388,
    "peak_sampled_lateral_n": 5.339876878530061,
    "peak_sampled_torque_nm": 0.6072055744910715,
    "longest_pull_duration_s": 2.0499999999998835,
    "observed_motion_deg": 30.07183837890625
  },
  "telemetry_sha256": "9d98480415114caa0ece64a75be6ee32fbe7e6d86d82b3afadb4dd9e2e88f42b",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.250000000000039,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.250000000000238,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.250000000000295,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 32.50000000000029,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 39.099999999999916,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 41.1499999999998,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 53.3999999999991,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 57.44999999999887,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 76.09999999999782,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 78.1499999999977,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 84.89999999999732,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 97.79999999999659,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 100.64999999999642,
      "phase": "motion_open",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 102.69999999999631,
      "phase": "motion_close",
      "reason": "Measured gripper joint travel is reaching 30 degrees"
    }
  ]
}