{
  "schema_version": "2.0",
  "run_id": "cli-grasp348-v21",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": true,
    "seating": false,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": true,
    "observed_motion": true,
    "arms_released": true
  },
  "blockers": [
    "seating"
  ],
  "metrics": {
    "samples": 2121,
    "duration_s": 105.99999999999612,
    "final_gap_mm": -0.00016612466424703598,
    "final_yaw_error_deg": 7.241600036621094,
    "final_lateral_error_mm": 0.7606661319732666,
    "final_relative_position_mm": [
      -0.009762060471985023,
      0.7606035214848816,
      -1.0001661721616983
    ],
    "final_pin_position_mm": [
      0.006856188520032447,
      0.32103140256367624,
      4.002094268798828
    ],
    "peak_sampled_axial_n": 36.678588148806305,
    "peak_sampled_lateral_n": 9.714772707081636,
    "peak_sampled_torque_nm": 1.3342552044011988,
    "longest_pull_duration_s": 2.0499999999998835,
    "observed_motion_deg": 30.071842193603516
  },
  "telemetry_sha256": "1884ab8bb0a8108fbdcb4558d43c598805c50ea94db8ee16e8e1dd143d4ab075",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.000000000000036,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 17.000000000000107,
      "phase": "retract",
      "reason": "Loaded insertion is showing less than 0.5 mm progress in one second"
    },
    {
      "time_s": 21.000000000000163,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 23.050000000000193,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 29.80000000000029,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 31.800000000000317,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 44.049999999999635,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 50.24999999999928,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 69.09999999999822,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 71.1499999999981,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 77.89999999999772,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 96.69999999999665,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 99.54999999999649,
      "phase": "motion_open",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 101.59999999999637,
      "phase": "motion_close",
      "reason": "Measured gripper joint travel is reaching 30 degrees"
    }
  ]
}