{
  "schema_version": "2.0",
  "run_id": "cli-recovery-v11",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": false,
    "sampled_torque_limit": true,
    "sustained_pull": false,
    "observed_motion": false,
    "arms_released": false
  },
  "blockers": [
    "complete_assembly_sequence",
    "sampled_force_limits",
    "sustained_pull",
    "observed_motion",
    "arms_released"
  ],
  "metrics": {
    "samples": 2049,
    "duration_s": 102.39999999999633,
    "final_gap_mm": 0.20397955179214478,
    "final_yaw_error_deg": -0.04378039017319679,
    "final_lateral_error_mm": 0.9926932454109192,
    "final_relative_position_mm": [
      -0.2832639729604125,
      -0.9514207486063242,
      -0.7960204966366291
    ],
    "final_pin_position_mm": [
      -0.28917097370140254,
      0.34519992186687887,
      4.090487957000732
    ],
    "peak_sampled_axial_n": 17.284103197637936,
    "peak_sampled_lateral_n": 19.174723261326484,
    "peak_sampled_torque_nm": 1.3999288273588362,
    "longest_pull_duration_s": 0.0,
    "observed_motion_deg": 0
  },
  "telemetry_sha256": "5ad43c95a7a75a01eb7d78256715601781aba52f8859f374e46b4b87fd12cf80",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.000000000000036,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 17.000000000000107,
      "phase": "retract",
      "reason": "Loaded insertion is showing less than 0.5 mm progress in one second"
    },
    {
      "time_s": 21.000000000000163,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 26.100000000000236,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 33.300000000000246,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 35.35000000000013,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 47.59999999999943,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 55.149999999999004,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 73.54999999999797,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 75.59999999999785,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 82.34999999999746,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 102.39999999999633,
      "phase": "safe_stop",
      "reason": "Pull proof timeout"
    }
  ]
}