{
  "schema_version": "2.0",
  "run_id": "cli-regression205-v18",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": false,
    "observed_motion": false,
    "arms_released": false
  },
  "blockers": [
    "complete_assembly_sequence",
    "sustained_pull",
    "observed_motion",
    "arms_released"
  ],
  "metrics": {
    "samples": 2357,
    "duration_s": 117.79999999999545,
    "final_gap_mm": 0.056989897042512894,
    "final_yaw_error_deg": 0.26907092332839966,
    "final_lateral_error_mm": 6.950569152832031,
    "final_relative_position_mm": [
      -0.8771403809078038,
      6.895001046359539,
      -0.9430101490579545
    ],
    "final_pin_position_mm": [
      -0.6957683945074677,
      0.2692893904168159,
      4.002153407782316
    ],
    "peak_sampled_axial_n": 38.10683443785677,
    "peak_sampled_lateral_n": 7.043894902661911,
    "peak_sampled_torque_nm": 0.35381777111026763,
    "longest_pull_duration_s": 0.2499999999999858,
    "observed_motion_deg": 0
  },
  "telemetry_sha256": "34ed2fc61da1662ee5266b3a8f33c434ea50f1c32e256010e4c52d71c4d257ce",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.250000000000039,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 26.250000000000238,
      "phase": "retract",
      "reason": "Insertion timeout with unresolved gap"
    },
    {
      "time_s": 30.250000000000295,
      "phase": "align",
      "reason": "Bounded recovery budget check"
    },
    {
      "time_s": 34.60000000000017,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 41.79999999999976,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 43.849999999999646,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 56.09999999999895,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 61.69999999999863,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 78.99999999999766,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 81.04999999999754,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 87.79999999999715,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 117.84999999999545,
      "phase": "safe_stop",
      "reason": "Pull proof timeout"
    }
  ]
}