{
  "schema_version": "2.0",
  "run_id": "full-v9",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": false,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": false,
    "sustained_pull": false,
    "observed_motion": false,
    "arms_released": false
  },
  "blockers": [
    "contact_torque_available",
    "complete_assembly_sequence",
    "sampled_torque_limit",
    "sustained_pull",
    "observed_motion",
    "arms_released"
  ],
  "metrics": {
    "samples": 1693,
    "duration_s": 84.59999999999734,
    "final_gap_mm": 0.159414604306221,
    "final_yaw_error_deg": 0.6367232799530029,
    "final_lateral_error_mm": 1.8779592514038086,
    "final_relative_position_mm": [
      -1.8287214916199446,
      -0.4272101796232164,
      -0.840585445985198
    ],
    "final_pin_position_mm": [
      -0.9672212181612849,
      1.3961120275780559,
      4.09585889428854
    ],
    "peak_sampled_axial_n": 17.942182823312056,
    "peak_sampled_lateral_n": 2.937903365781033,
    "peak_sampled_torque_nm": null,
    "longest_pull_duration_s": 0.0,
    "observed_motion_deg": 0
  },
  "telemetry_sha256": "fd3f51cc61b860297031d43cd703d355fab0e013e1abf0481f904bc960637afd",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.100000000000037,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 19.200000000000138,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 21.200000000000166,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 33.40000000000024,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 37.40000000000001,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 55.74999999999897,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 57.79999999999885,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 64.54999999999848,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 84.59999999999734,
      "phase": "safe_stop",
      "reason": "Pull proof timeout"
    }
  ]
}