{
  "schema_version": "2.0",
  "run_id": "pin-v6",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": false,
    "telemetry_contiguous": false,
    "contact_force_available": false,
    "contact_torque_available": false,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": false,
    "pin_engagement": true,
    "sampled_force_limits": false,
    "sampled_torque_limit": false,
    "sustained_pull": false,
    "observed_motion": false,
    "arms_released": false
  },
  "blockers": [
    "telemetry_finite",
    "telemetry_contiguous",
    "contact_force_available",
    "contact_torque_available",
    "complete_assembly_sequence",
    "seating",
    "sampled_force_limits",
    "sampled_torque_limit",
    "sustained_pull",
    "observed_motion",
    "arms_released"
  ],
  "metrics": {
    "samples": 1527,
    "duration_s": 76.29999999999781,
    "final_gap_mm": 1.9219074249267578,
    "final_yaw_error_deg": 0.46094414591789246,
    "final_lateral_error_mm": 1.0637868642807007,
    "final_relative_position_mm": [
      -1.0613566264510155,
      -0.07186688162619248,
      0.9219073690474033
    ],
    "final_pin_position_mm": [
      0.05103361399960704,
      2.747282385826111,
      4.910239018499851
    ],
    "peak_sampled_axial_n": null,
    "peak_sampled_lateral_n": null,
    "peak_sampled_torque_nm": null,
    "longest_pull_duration_s": 0.0,
    "observed_motion_deg": 0
  },
  "telemetry_sha256": "5aa71e8d87205f91f9c2986d9191d42ce3adb8363a64d9cf30da02883629bf53",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 12.950000000000049,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 20.200000000000152,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    },
    {
      "time_s": 22.20000000000018,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 34.40000000000018,
      "phase": "pin_align",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 36.45000000000007,
      "phase": "pin_insert",
      "reason": "Physical pin is aligned with cross holes"
    },
    {
      "time_s": 47.44999999999944,
      "phase": "verify_pin",
      "reason": "Measured cross pin position is within tolerance"
    },
    {
      "time_s": 49.499999999999325,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 56.24999999999894,
      "phase": "pull_test",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 76.29999999999781,
      "phase": "safe_stop",
      "reason": "Pull proof timeout"
    }
  ]
}