{
  "schema_version": "2.0",
  "run_id": "pull-controller-probe-v13",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": true,
    "telemetry_contiguous": true,
    "contact_force_available": true,
    "contact_torque_available": true,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": true,
    "pin_engagement": true,
    "sampled_force_limits": true,
    "sampled_torque_limit": true,
    "sustained_pull": true,
    "observed_motion": true,
    "arms_released": true
  },
  "blockers": [
    "complete_assembly_sequence"
  ],
  "metrics": {
    "samples": 595,
    "duration_s": 29.700000000000287,
    "final_gap_mm": -0.0001073349267244339,
    "final_yaw_error_deg": 0.32149776816368103,
    "final_lateral_error_mm": 1.9446451663970947,
    "final_relative_position_mm": [
      0.49708480946719646,
      1.8800402758643031,
      -1.0001073824241757
    ],
    "final_pin_position_mm": [
      0.21554494742304087,
      -0.7363266195170581,
      4.000008571892977
    ],
    "peak_sampled_axial_n": 28.08707802816604,
    "peak_sampled_lateral_n": 7.926639565469894,
    "peak_sampled_torque_nm": 0.19399019644955384,
    "longest_pull_duration_s": 2.0000000000000284,
    "observed_motion_deg": 30.071863174438477
  },
  "telemetry_sha256": "c63ccd3acb02766b06d82638f345d1bf427077c5802ac55436d805f811631f1c",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "pull_test",
      "reason": "Grasp completed"
    },
    {
      "time_s": 21.150000000000166,
      "phase": "transfer",
      "reason": "Executing bounded collision clearance waypoints"
    },
    {
      "time_s": 23.950000000000205,
      "phase": "motion_open",
      "reason": "Waypoint transfer completed"
    },
    {
      "time_s": 25.950000000000234,
      "phase": "motion_close",
      "reason": "Measured gripper joint travel is reaching 30 degrees"
    }
  ]
}