{
  "schema_version": "2.0",
  "run_id": "seating-v5",
  "backend": "Isaac Lab PhysX on bimanual YAM",
  "simulation_task_passed": false,
  "production_ready": false,
  "production_blockers": [
    "Physical hardware validation is not performed",
    "Contact readings are sampled at the control rate. Substep peak coverage is not certified",
    "Independent wrist sensor calibration and safety validation are outstanding"
  ],
  "checks": {
    "telemetry_finite": false,
    "telemetry_contiguous": false,
    "contact_force_available": false,
    "contact_torque_available": false,
    "no_sensor_errors": true,
    "complete_assembly_sequence": false,
    "seating": true,
    "pin_engagement": false,
    "sampled_force_limits": false,
    "sampled_torque_limit": false,
    "sustained_pull": false,
    "observed_motion": false,
    "arms_released": false
  },
  "blockers": [
    "telemetry_finite",
    "telemetry_contiguous",
    "contact_force_available",
    "contact_torque_available",
    "complete_assembly_sequence",
    "pin_engagement",
    "sampled_force_limits",
    "sampled_torque_limit",
    "sustained_pull",
    "observed_motion",
    "arms_released"
  ],
  "metrics": {
    "samples": 446,
    "duration_s": 22.25000000000018,
    "final_gap_mm": 0.05670415610074997,
    "final_yaw_error_deg": 0.04718738794326782,
    "final_lateral_error_mm": 1.4786467552185059,
    "final_relative_position_mm": [
      0.27113602845929563,
      -1.4535754453390837,
      -0.9432958904653788
    ],
    "final_pin_position_mm": null,
    "peak_sampled_axial_n": null,
    "peak_sampled_lateral_n": null,
    "peak_sampled_torque_nm": null,
    "longest_pull_duration_s": 0.0,
    "observed_motion_deg": 0
  },
  "telemetry_sha256": "a7c1e2eb67169c2993677dc151e9ed1b811345046e4eea6b7305bbaa122b22d2",
  "events": [
    {
      "time_s": 10.000000000000007,
      "phase": "align",
      "reason": "Transport completed. Using measured relative pose."
    },
    {
      "time_s": 13.00000000000005,
      "phase": "insert",
      "reason": "Measured alignment is within 1 mm and 1 degree"
    },
    {
      "time_s": 20.300000000000153,
      "phase": "verify_seating",
      "reason": "Measured seating geometry is within tolerance"
    }
  ]
}